Sold Out
Coil Clout_MTL Alien v3_5 Wraps_ .35Ω
$ 14.99
The MTL Alien v3 (29) .35Ω is masterfully designed to provide supreme flavor on regulated devices and require minimal power/wattage to run Coil resistance may vary (+)or(-) depending on the devices being used & the length of your leads Coil resistance is per set after pre-fire Coil Clout products are intended...
The MTL Alien v3 (29) .35Ω is masterfully designed to provide supreme flavor on regulated devices and require minimal power/wattage to run
Coil resistance may vary (+)or(-) depending on the devices being used & the length of your leads
Coil resistance is per set after pre-fire
Coil Clout products are intended for advanced users who are familiar with Ohms Law & battery safety
Specs: 3x28x37
Inner Diameter: 2.5mm
Alloy: Nichrome 80
Wraps: 5
Best With:
Regulated device or Boro Device
Suggested cleaning steps:
-Remove Cotton
-Carefully dry burn (do not lean on fire button/melt)
-Blow away any gunk you can
-Let cool to room temperature
-Brush off gunk with toothbrush, NOT a metal brush.
-Repeat Dryburn / blow / Let cool until clean
-Rinse with water
-Prosper
After cleaning and before re-wicking, be sure to check the builds are glowing evenly and there are no hotspots
Do not hard-force cotton
Handle with care
Do not install on series or stacked devices (low Ω)
Crafted from the highest quality Nichrome 80 on the market
Packaged by the set (pair of 2)
Coils come standard with a 3mm Inner Diameter
Thoroughly cleaned in an ultrasonic cleaner & inspected before shipment
Handcrafted in the USA
Coil resistance (Ω) is for the pair of coils after they have been pre-fired
Coil resistance may vary (+)or(-) depending on the devices being used & the length of your leads
Coil resistance is per set after pre-fire
Coil Clout products are intended for advanced users who are familiar with Ohms Law & battery safety
Coil resistance may vary (+)or(-) depending on the devices being used & the length of your leads
Coil resistance is per set after pre-fire
Coil Clout products are intended for advanced users who are familiar with Ohms Law & battery safety
Specs: 3x28x37
Inner Diameter: 2.5mm
Alloy: Nichrome 80
Wraps: 5
Best With:
Regulated device or Boro Device
Suggested cleaning steps:
-Remove Cotton
-Carefully dry burn (do not lean on fire button/melt)
-Blow away any gunk you can
-Let cool to room temperature
-Brush off gunk with toothbrush, NOT a metal brush.
-Repeat Dryburn / blow / Let cool until clean
-Rinse with water
-Prosper
After cleaning and before re-wicking, be sure to check the builds are glowing evenly and there are no hotspots
Do not hard-force cotton
Handle with care
Do not install on series or stacked devices (low Ω)
Crafted from the highest quality Nichrome 80 on the market
Packaged by the set (pair of 2)
Coils come standard with a 3mm Inner Diameter
Thoroughly cleaned in an ultrasonic cleaner & inspected before shipment
Handcrafted in the USA
Coil resistance (Ω) is for the pair of coils after they have been pre-fired
Coil resistance may vary (+)or(-) depending on the devices being used & the length of your leads
Coil resistance is per set after pre-fire
Coil Clout products are intended for advanced users who are familiar with Ohms Law & battery safety